It is common that most people find it stressful to figure out standard dimensions for a bedroom closet as dimensions for closet vary by their purpose, designs, and types of closets such as reach-in closets or walk-in closets.
Therefore, it is better for you to know Standard bedroom closet dimensions, and the guidelines below will help you decide on standard dimensions for a bedroom closet and amenities for your space.
- Laundry Room: What is The Best Clothes Rack?
- Best Japanese Chisel Makers
- Top 4 Best Kotatsu Heated Table
What Are The Perfect Closet Rod And Shelve Height?
In general, the standard bedroom closet shelf height should be about 87 inches from the floor with a single closet rod placed at around 72 inches in height.
However, these numbers are not compulsory, and you can create your own designs and modifications.
For example, while a shorter person would like to have lower shelving, a tall woman may prefer a higher rod for floor-length dresses.
When working with the specifics of your closet, you have to focus on factors such as slanted ceilings or ducting.
When having your closet design planned, you should begin with the standard bedroom closet dimensions and modify them when necessary to keep everything good for you.
1. Shelf Height
Ideally, the top shelf of a closet should be high enough to tuck items out of the way. In addition, It should be low enough that you can get them without a stool.
It is recommended that the standard bedroom closet shelf height should be between 87 and 96 inches from the floor. Additionally, the shelf should sit at least a foot away from the closet ceiling.
However, the top standard bedroom closet shelf height should be kept below 96 inches as shelves of this height are easy to reach.
When setting a vertical row of shelves in the closet, give each shelf space 12 inches apart.
The height of the lowest shelf in your closet should be 16 inches above the floor, which makes room for tall boots and shoes underneath it.
2. Shelf Depth
One of the standard bedroom closet dimensions that you can adjust based on your intention to store is the self-death.
While sweaters, towels, and sheets need more room, T-shirts just need only a space of about 12 inches.
Only 10 to 14 inches of depth is enough for most shoes.
In case your shelves are made too deep, you may get the risk of not being able to reach small items tucked on the back of the shelf.
3. Rod Height
Standard rod height for a single closet rod which leaves ample hanging space for floor-length dresses should be 60 inches.
With double rods, you should hang the top rod 80 inches above the floor and the bottom 40 inches above the floor and make a space of at least 3 feet between the two rods.
These systems will be suitable for dresses, blouses, shirts, or pants by folding these clothes over a clothes hanger.
If you want to set shelves above a medium-height rod, place the rod at least 54 inches from the floor.
It is also important for you to have a closet depth of at least 24 inches, so ensure your closet rod is at least 12 inches away from the closest wall.
4. Rod Capacity
Despite your having more or fewer clothes, following the dimensions of a standard bedroom closet, everyone should have a closet rod space of 4 feet.
Factoring about 2 1/2 inches of the rod space per garment allows abundant room for getting a garment and stops clothes from being smashed together and wrinkled.
Besides the width of your rod, you have to consider other factors and the weight of your clothes is one of these.
While a 6-foot span of the closet rod can support certain amounts of weight, due to its shape and what it’s made of, six feet of the oval aluminum anodized rod can hold 45 pounds.
The rod with the same length, made of 1 5/16-inch steel polished chrome, can hold 170 pounds.
On average, the weight of jeans, shirts, and suits are 1 1/2 pounds, 1/2 pound and 4 pounds respectively.
What Are Standard Closet Measurements?
It is very stressful and tiring for everyone to figure out how to decorate our space.
Trying to figure out the standard dimensions for your bedroom closet is the last thing you want to do.
In case your moving into a new home or looking to make use of your space, knowing that there are different closet styles is quite fundamental.
1. Reach-In Closets
A reach-in closet allows clothes to hang perpendicular to the back wall because of its good depth, and in order not to reach the back of the closet but for stepping inside, the closet should be shallow enough.
It is common for a reach-in closet to get the standard minimum depth of is 24 inches, but a closet used for storing coats or other bulky hanging items should be as deep as 28 inches.
A closet is supposed to be not deep enough to allow hanging clothes when it is less than 22 inches deep.
The length of the closet’s side return walls is also considered as a critical dimension in a reach-in closet.
If the return walls, which are the short sections of a wall extending from the closet’s sidewalls to the door opening, are too long, deep spaces may be created at the ends of the closet which are difficult to reach into.
In general, return walls should be less than 12 inches.
2. Walk-In Closets
The standard dimensions for this bedroom closet should be at least 4 feet wide by 4 feet deep.
It is better for the closet’s storage accommodations to be designed so that there is at least a 24-inch clear passageway between shelves or hanging clothes inside the closet.
Because hanging clothes take up 2 feet of depth, a 4-foot-wide closet can only support hanging storage along its back wall and one sidewall.
A closet at 6 feet wide allows storage on both sidewalls as well as the back wall, while still has 24 inches of clear space in the middle of the closet.
3. Seating and Walkways
Large walk-in closets with widths greater than 10 feet are ideal because they can support seating inside the closet or a storage island or peninsula.
In addition, You can always find at least 24 inches of clear walkway space on all sides in these structures.
4. Hanging Heights
Hanging rods are tools that are positioned in the closet to utilize the space given the types of clothes that are hung on them.
A short-hang rod which is typically put 42 inches above the closet floor is suitable for hanging shirts or blouses.
In a double-hang configuration, one rod should be set at the height of 42 inches while another rod is placed above this one at 84 inches above the floor.
Therefore, it provides two spaces for short hanging, one above the other.
A mid-hang rod is used to hang pants but for folding them over a hanger at the height of 50 inches above the floor.
A long-hang rod provides enough vertical space for longer clothes, such as skirts and coats; it is usually positioned 68 inches above the floor.
You should have the upper shelf in a closet set at the same height of 84 inches above the floor as the upper rod in a double-hang configuration, and to have enough storage of large items the shelf should be at least 16 inches deep.
With extremely bulky items, such as pillows or blankets, Shelves should be 24 inches deep.
What Are The Standard Walk-In Closet Dimensions?
A walk-in closet designed correctly is capable of providing an amble useful storage space, but if you try to jam too much into space, even a big closet can lose its function because of being too crowded.
Adhering to standard dimensions for this bedroom closet will make sure that your closet is as luxuriously abundant as you wish.
1. Typical Widths and Depths
The common minimum size of walk-in closets should be 4 feet wide by 4 feet deep.
With these standard bedroom closet dimensions, the closet will give shelves and hanging space accommodation on one sidewall and the back wall.
Width of 6 feet will help to support storage on all three walls, and a width of 10 feet will allow a seating area in the middle of the closet.
2. Walkway Clearances
One of the standard bedroom closet dimensions that you could consider is walkway space.
Always remember that hanging clothes take up about two 2 of horizontal space so the ability to provide 24 inches of clear walkway space between any shelves, rods or other obstructions requires a walk-in closet to be big enough.
Therefore, the width of a closet must be 6 feet in order to create hanging areas on both side walls; a smaller closet would not have 2 feet of clear space between the two sections.
The minimum of 24-inch also applies to the clear walkway space on all sides of an island; if the room is not big enough for the 2-foot walkway in addition to this area, an island is not feasible.
3. Storage and Hanging Placement
In a configuration, a double hang is a term indicating that hanging rods can be positioned so that two rods occupy one wall, one above the other.
This configuration is absolutely best for shirts, jackets, and other short garments. Double-hang rods should be 40.5 inches high for the low rod and 82 inches for the high rod.
With medium-hang rods, Having them mounted 54 inches above the floor is best for pants and longer garments while 66-inch-high long-hang rods would support dresses, coats, and other long garments.
To accommodate big items, shelves above the rods should be 14 to 16 inches deep.
4. ADA Requirements
The standard bedroom closet dimensions established by the Americans with Disabilities Act require a walk-in closet to have adequate clear maneuvering space so that users in wheelchairs can easily get access to the inside items of the closet.
The minimum clear space should be 30 inches wide by 48 inches deep, so it is not wide enough for the standard recommended walkway width of 24 inches to meet the ADA.
The act also suggests that the reach ranges within the closet be between 15 inches and 48 inches from the floor; therefore, shelving, hooks, and hanging rods in the closet should be kept within this range.
The Appropriate Shelf Height for Closets
Closets play an important role in a well-organized home. The closet would be more efficient and have more storage space if shelves are designed properly.
Shelf height could help to maximize storage space but still utilize the vertical area within the closet as well.
The shelf heights may be modified by custom built-homes to accommodate the heights of family members, but there is a determined standard bedroom closet shelf height.
1. Top Shelf
The standard bedroom closet top shelf height should be 84 inches above the floor level, which allows a double-deck arrangement of closet rods below this shelf.
You may have one rod mounted just below the top shelf and the other rod mounted 42 inches from the floor.
The hight of 7 feet of the top shelf is quite stretch for many people while the shelf width may be limited to less than 12 inches to ease access.
The top shelf can be placed above all other shelf units in the closet and about 1 foot should be allowed between the shelf and the ceiling.
2. Shelf Over Single Rod
The common height of a single closet rod should be 68 inches above the floor with a shelf above the rod.
And it should be 16 inches wide to support more storage.
The combination of the single closet rod with the top shelf provides two shelves above the single closet rod.
Linen shelves are commonly used for sweaters, shirts, and other clothes that are not normally stored on hangers, as well as bedding.
They are commonly placed below the top shelf and extend down to floor level and the 16-inch-wide shelves are placed every 15 inches vertically.
Remember that Linen shelves should be no longer than 32 inches in case there’s no bracing in the middle.
4. Shoe Shelves
Shoe shelves can be very flexible in the closet arrangement.
Vertically spacing the shelves every 7 inches allows for utilizing the closet space as much as possible.
A combination of linen shelves with 15-inch spacing and shoe shelves with 7-inch spacing can create abundant useful storage in a small area.
What Is The Dowel Size For Closets?
If you are keeping an older closet or having an intention to have a new one, a new closet rod deserves to be considered because they typically break or sag and are always a part of a new closet redesign.
There are various options for replacing them and wood dowels are an ideal option to make a cheap, customizable closet rod.
1. Closet Rod Dowel Diameter
To allow for plenty of hanging strength, a closet-rod dowel should be usually between 1 1/4 inches to 1 3/8 inches in diameter.
If properly supported, a closet-rod dowel can stand breakage, and will not bend.
These dowels are commonly hung between two round wall brackets and they are secured to the wall with screws and drywall anchors.
An alternative is laying them into U-shaped support that is part of the angle bracket supporting a shelf over the closet rod.
2. Closet Rod Length
Depending on the standard bedroom closet dimensions and the amount of clothing you intend to hang, you should consider the length of the dowel in a proper way.
Usually, a 4-foot long closet rod is capable of hanging the clothes for one person.
Always remember that hanging one garment requires an inch of space, so keep this guide to plan your length.
If the dowel is to be hung across the width of the closet, the length should be about 1/4 inch shorter than the closet width, measured from wall to wall.
The difference of 1/4-inch is to accommodate for the two brackets mounting the dowel; each one is about 1/8 inch thick.
The dowel set into an angle bracket that holds the dowel in U-shaped support has the same length as the width of the closet.
Normally, dowel lengths sold are 6 feet and 8 feet, though dowels up to 10 feet long are also common.
And you can use a hand saw to cut the dowel to length. Some dowels are also priced per foot, you can buy only the length you think is suitable for the rod.
3. Alternative Dowel Sizes
If you are going to use double hanging rods, you have to have a shorter dowel but still keep your dowel diameter between 1 1/4 inches or 1 3/8 inches.
Usually, one person takes up about 4 feet of closet-rod length and a double-hung rod is typically 4 feet long.
The diameter of the shorter rod may become smaller, so it is common to lean towards the 1 1/4 inch dowel in the case of double-hung rods.
Metal dowels, stronger material than wood, maybe thinner 1 inch than others in diameter.
4. Hanging Dowels and Towel Bars
Use a dowel having a smaller diameter If you have an intention of having a dowel hanged from the closet rod to create a hanging rod for more space.
A 1-inch dowel is perfect to support the weight of shirts and pants.
It is also small enough to be lighter in weight than the closet rod itself, which places less strain on the closet rod supporting the weight of the dowel and the clothes on the dowel.
If you want to create towel bars with dowels, a diameter of 1 inch is acceptable.
What Size Is Perfect For a Coat Closet?
Sometimes coat closets designed with the same dimensions as any clothes closet can get cramped.
If you follow these specific guidelines for coats, this practice will never happen.
1. Coats and Codes
Closets are not covered by the majority of building codes.
It is common for the standard dimensions for a bedroom closet to be decided by the builder, designer, or owner.
If you’re in case of choosing the size of a closet for holding coats, you typically won’t regret leaning toward the bigger sizes.
2. Width Guidelines
We can change closet width guidelines due to many factors.
The typical design of common coat closet bases on how much room is available, or how much room you’re willing to give up.
Generally, you should allow about 4 inches of width for an individual coat or 48 inches of width for each person who uses the closet.
3. Depth Guidelines
Many builders use the depth of most clothes closets, 24 inches, for coat closets — but that’s typically not enough.
This is because coats are more likely to be wider than shirts and get cramped wider at 24 inches. 19 inches is the typical width of coat hangers — add a heavy coat and it’s cramped at 24 inches.
Therefore, coat closets should be at least 28 inches deep — often 30 inches — to prevent sleeves and bulky coats from interfering with the closet door.
4. Height Standards
Coat closets and the existing interior doors in your home typically have the same height.
Standard doors need often 80-inch-tall openings, and that’s suitable for coats.
Any changes in opening height look odd or out of proportion to the other doors.
The actual height on the inside of the closet is usually as tall as the ceiling height in the home, typically between 87 and 96
5. Return Walls
The return walls which are the face of the closet on both sides of the door will regulate the door opening size so it should be no wider than about 18 inches.
By contrast, the return wall wider than 18 inches closes off the sides of the closet, which makes it hard to reach coats that are tucked behind them.
6. Doors Sizes
What the average coat closet should have is a 2 foot, 8 inches — called “two-eight” — door, which is 32 inches wide.
It is common for standard doors to be more narrow, down to 24 inches, or wider, up to 36 inches with individual sizes typically graduating in 2-inch increments.
7. Rough Door Openings
Rough door openings include the stud frame around the opening.
By adding 2 inches to the width of the door, and 2 1/2 inches to the height, we can calculate the closet’s rough opening size.
For instance, a 32-inch door would measure 34 inches wide, and 82 inches tall.
8. Rod Installation
A vertical space of 46 to 66 inches can typically meet the requirement of coats. If you intend to use only one rod, place it 72 inches from the floor.
But in the case of using two rods, it’s common to squeeze the requirement and install the higher rod at 80 to 84 inches, and the lower rod between 40 and 42 inches.
The rod should be placed at the center according to width, 14 or 15 inches from the back wall.
What is The Standard of Hallway Linen Closet Size?
Despite no standards in terms of linen-closet size for you to follow, you can apply some specific dimensions to design one suitable for storing all your items.
To finish this project, you should carefully think and plan in advance like measuring your own items.
It will take you time to design the linen closet but the result will suit your needs.
1. Planning the Design
Before starting the design phase, you should spend time considering a few different perspectives and known measurements.
The width of the typical linen closet is usually 30 to 36 inches, which allows for side-by-side storage of towels, bedsheets, and other items on the shelves.
The shelf board is easily cut to any dimension, so it is not necessary to plan a closet around the size of the shelving.
Let’s remember that the best method is planning the width based on the size of the items stored inside so you should measure these items prior to designing the closet if possible.
2. Door Size
There is always a standard to design door sizes.
However, most doors come in a range of width sizes from 28 inches and increasing in size every 2 inches up to 36 inches.
Determining your linen-closet width is subject to this door size.
This is because it is impossible for the linen closet to be smaller than the width of the door, or the door will not mount properly on the closet.
If your closet space requires a custom cut door, you can find it available in almost any size, and of course, it will cost more as well.
Linen closets, the height of which is almost always the height of the ceiling, extend up to the ceiling with framed walls built into the existing space.
It is not really advantageous to reduce the height in any way, and more work will be added to the process.
Similarly, it is often impossible to extend the height of the ceiling because it involves cutting into ceiling joists.
Expanding the ceiling height is not really beneficial as well, because access to shelving up high is limited by the door height.
Standard door heights are 80 inches.
4. Shelf Spacing
Before you decide on the width shelves, take the amount of shelving inside the linen closet into account.
It is common to space shelving every 15 inches when installing shelves, which provides plenty of room for any object and allows for plenty of shelves inside the closet.
In order to leave room for about five total shelves in the linen closet, you should place the first shelf higher from the floor, between 18 and 20 inches.
Unlike other factors, Linen closets are not typically very deep.
Some may only extend back 15 inches.
By contrast, others are 24-inches deep, which allows for accommodating the main items, just about 12 inches square in most cases, kept in the linen closet such as towels and sheets.
Greater depths greater provide more room, but it is more difficult to reach into the closet and accessing these items because you have to reach farther into the space to retrieve them.
There are different closet styles that require different Standard bedroom closet dimensions. Therefore, we hope that through this article you will have a better understanding of standard dimensions for a reach-in or walk-in closet as well as the standard bedroom closet shelf height or the closet rob.
- Tatami Floor Cushion Shortlist
- Top 3 Tatami Mats Judo Shortlist
- Tatami Mats Comfortable For Sleeping
Tags: master bedroom, closet organizers